EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Sequence CONTROLLE

EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Sequence CONTROLLE

Blog Article

The EPEVER Tracer AN Collection Solar Demand Controller is often a highly productive solar controller made for off-grid solar methods. According to multiphase synchronous rectification technological innovation, it makes certain optimized Power conversion and program security for a wide array of photovoltaic (PV) purposes.

Crucial Functions of your EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Charge Controller technology for exceptional photo voltaic energy harvesting. Critical functions include things like:

Multiphase Synchronous Rectification (MSR) for enhanced Power conversion.
Superior MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Display screen with real-time info checking.
Multiple Load Command Modes including handbook and timer.
Extensive Electronic Protections in opposition to overcharging, in excess of-discharging, brief circuits, and reverse polarity.
Stage-by-Stage Manual to Setting Up the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Ensure all factors are included: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Confirm the product selection and voltage scores match your solar panel and battery specs.
2. Mounting the Demand Controller
Find a perfectly-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller utilizing the provided mounting brackets.
Keep right clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Warning: Normally adhere to appropriate security protocols and ensure the program is driven off prior to connecting factors.

Move 1: Link the battery terminals towards the demand controller (favourable to beneficial, detrimental to detrimental).
Phase 2: Join the solar panel array towards the PV input terminals.
Action 3: Link the load terminals if employing a immediate load connection.
Stage four: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Energy around the controller by connecting the battery to start with.
Use the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load visit here Regulate Modes: Guide, timer, mild control.
five. Monitoring and Details Logging
The Tracer AN Collection supports actual-time monitoring using the MT50 distant meter.
Data can be logged by using the RS485 conversation port using software program such as Photo voltaic Station Personal computer.
Distant monitoring is feasible with the EPEVER WiFi module.
six. Troubleshooting Widespread Difficulties
Problem one: No Ability Output

Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Concern two: In excess of-Voltage Protection

Confirm the photo voltaic array’s voltage score.
Regulate technique parameters if essential.
Problem 3: No Battery Charging

Inspect PV wiring for continuity.
Affirm MPPT settings during the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology makes certain:

Greater Effectiveness: Decreased Strength losses in the course of conversion.
Enhanced Dependability: Secure efficiency less than variable loads.
Extended Battery Life: Regular and exact charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technology is an Outstanding choice for optimizing solar power technology and increasing battery existence. By pursuing the above setup information, users can guarantee most efficiency and technique longevity.