EPEVER Photo voltaic CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Charge Controller is often a very effective solar controller created for off-grid photo voltaic methods. Based upon multiphase synchronous rectification technology, it assures optimized Electricity conversion and process steadiness for a variety of photovoltaic (PV) purposes.
Important Capabilities from the EPEVER Tracer AN Sequence Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller engineering for superior photo voltaic Strength harvesting. Important attributes contain:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Increased battery life.
LCD Screen with authentic-time details checking.
Many Load Manage Modes such as manual and timer.
Comprehensive Digital Protections versus overcharging, about-discharging, small circuits, and reverse polarity.
Action-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all parts are provided: Tracer AN unit, temperature sensor, conversation cables, and user manual.
Validate the design amount and voltage ratings match your solar panel and battery requirements.
two. Mounting the Cost Controller
Choose a nicely-ventilated, dry location near the battery financial institution.
Safe the Tracer AN controller utilizing the presented mounting brackets.
Manage good clearance for warmth dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always abide by good basic safety protocols and make sure the system is run off right before connecting elements.
Phase one: Connect the battery terminals on the charge controller (beneficial to good, destructive to damaging).
Stage two: Hook up the photo voltaic panel array for the PV enter terminals.
Stage three: Link the load terminals if employing a immediate load connection.
Move 4: Double-check all connections for polarity and tightness.
4. Configuring the Controller Options
Electrical power on the controller by connecting the battery first.
Make use of the Liquid crystal display Display screen to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Manual, timer, mild Regulate.
five. Checking and Information Logging
The Tracer AN Series supports real-time monitoring using the MT50 remote meter.
Facts could be logged through the RS485 conversation port employing program including Solar Station Laptop.
Remote checking is feasible While using the EPEVER WiFi module.
six. Troubleshooting Common Troubles
Issue one: No Electrical power Output
Look at battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: In excess of-Voltage Protection
Confirm the solar array’s voltage score.
Adjust method parameters if required.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations within the menu.
Advantages of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Better Performance: Lowered Electrical power losses throughout conversion.
Improved Dependability: Click Here Steady effectiveness below variable hundreds.
Longer Battery Existence: Reliable and exact charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is undoubtedly an Remarkable choice for optimizing solar power generation and increasing battery life. By adhering to the above mentioned setup guide, consumers can make certain utmost performance and procedure longevity.